EMT Conduit System
-
Long-Radius EMT Elbow – Galvanized SteelVelkor long-radius EMT elbows create a 90-degree change of direction while giving conductors a broader path through the bend than a compact elbow. The galvanized-steel construction and nine cataloged trade sizes support coordinated EMT runs where pull planning and bend geometry matter.MORE ROOM THROUGH THE TURN A standard 90-degree elbow is the compact choice; a long-radius elbow is the planning choice when the route can accommodate a broader bend. The larger sweep gives conductors a less abrupt change of direction and makes the elbow useful on runs where cable-pulling access and route geometry deserve more attention. […]
VIEWINQUIRY -
EMT Offset Connector – Compression – Zinc Die CastVelkor compression EMT offset connectors combine a built-in lateral shift with a compression-style conduit connection. The fitting aligns EMT with an offset enclosure knockout while the compression nut supports the conduit around its circumference and avoids a projecting set-screw head.OFFSET ALIGNMENT WITH A SMOOTHER GRIP This connector handles two tasks at the enclosure entry: it shifts the conduit axis to meet the knockout and secures EMT with a compression connection. The result is a cleaner alternative to adding a separate field offset immediately before the box. Compared with the set-screw offset connector, the compression […]
VIEWINQUIRY -
EMT Offset Connector – Set Screw – Zinc Die CastVelkor set-screw EMT offset connectors shift the conduit centerline before the threaded enclosure entry, helping align EMT with an offset box or knockout. Direct screw fastening makes the conduit connection easy to see and adjust during installation.ALIGN THE ENTRY, NOT THE WHOLE CONDUIT RUN Small alignment differences near a box can otherwise force installers to rework the conduit route or create an additional field offset. This connector builds the lateral shift into the fitting so the EMT can meet a displaced knockout more cleanly. The set-screw version is the practical choice […]
VIEWINQUIRY -
EMT-to-Box Pull Elbow – Set Screw – Zinc Die CastVelkor EMT-to-box pull elbows turn an EMT run 90 degrees as it enters a box or enclosure while preserving access to the conductor path. The zinc die-cast body uses a set-screw conduit connection and is suited to layouts where a field-bent sweep would consume too much space near the enclosure.TURN THE RUN AND KEEP THE PULL ACCESSIBLE. Velkor EMT-to-EMT pull elbows change the direction of a conduit run while keeping the bend area accessible during conductor pulling. Set screws secure the EMT at both ends of the elbow body. The accessible pull-elbow format is useful where a compact directional fitting is preferred over a […]
VIEWINQUIRY -
EMT-to-Flex Connector – Zinc Die CastVelkor EMT-to-Flex connectors combine a compression connection for EMT with a screw-in connection for flexible metal conduit. The one-piece transition replaces an improvised multi-fitting changeover and helps buyers coordinate a fixed EMT run with a flexible final section at equipment or other movement-sensitive connection points.ONE FITTING FOR THE RIGID-TO-FLEXIBLE HANDOFF EMT is useful for the fixed portion of a raceway; flexible metal conduit is useful where the final approach needs movement or routing freedom. This connector is designed for the point where those two systems meet, with a compression interface on the EMT side and a screw-in interface on […]
VIEWINQUIRY -
EMT-to-EMT Pull Elbow – Set Screw Type – Zinc Die CastVelkor EMT-to-EMT pull elbows change direction between EMT runs and provide cable-pulling access. Set screws secure both conduit ends to the zinc die-cast body.
TURN THE RUN AND KEEP THE PULL ACCESSIBLE. Velkor EMT-to-EMT pull elbows change the direction of a conduit run while keeping the bend area accessible during conductor pulling. Set screws secure the EMT at both ends of the elbow body. The accessible pull-elbow format is useful where a compact directional fitting is preferred over a […]
VIEWINQUIRY -
EMT Inside Corner – Set Screw Type – Zinc Die CastVelkor zinc die-cast EMT inside corners route EMT conduit neatly around an inside corner. The set-screw design secures the conduit while providing a compact directional change.
ROUTE EMT THROUGH A TIGHT INSIDE CORNER. Velkor zinc die-cast EMT inside-corner fittings guide conduit around an internal corner while set screws secure the connected EMT sections. The shaped body keeps the direction change compact where two interior surfaces meet. Direct access to the set screws makes each conduit connection easy to position and inspect. […]
VIEWINQUIRY -
EMT Entrance Cap – Clamp-On Type – AluminumVelkor clamp-on EMT entrance caps provide a protected service-entrance termination for EMT conduit. The aluminum body clamps onto the conduit for a compact termination.A LIGHTWEIGHT CAP FOR CONDUCTOR ENTRY. Velkor clamp-on EMT entrance caps attach at the conduit end and provide a defined transition for incoming conductors and it is weatherproof. The clamp-on connection secures the cap without requiring a threaded conduit end. Its aluminum body keeps the component light while the cap geometry organizes the conductor path […]
VIEWINQUIRY -
EMT Conduit Hanger – With Screw and Nut – Galvanized SteelVelkor EMT conduit hangers support EMT conduit from threaded rod or structural members. The galvanized steel body is supplied with a screw and nut for secure positioning.SUSPEND EMT WITH A COMPLETE FASTENER SET. Velkor EMT conduit hangers support conduit from a mounting structure and close around the raceway with the supplied screw and nut. The hardware provides a simple way to position the hanger around the selected conduit size. The galvanized steel body is shaped for support rather than for joining […]
VIEWINQUIRY
LOAD MORE PRODUCTS
