Product Range

Browse the full catalog

Explore EMT, IMC/RMC and flexible conduit systems, fittings, conduit boxes, strut channels, and IEC 61386 products.

Not another static PDF catalog. Select a product family, review the available options instantly, and build a structured inquiry—all in one place.

PRODUCT CATEGORIES

EMT Conduit System

IMC/RMC Conduit System

Flexible Conduit System

Electrical Boxes & Conduit Bodies

Strut Channel System

IEC 61386 Conduit System

Switches & Sockets

Electrical Boxes & Conduit Bodies

LOAD MORE PRODUCTS

Solutions

Built for
Demanding Projects

Reliable, code-compliant product solutions for industrial and commercial projects of any scale.

01

Industrial Facilities

Complete electrical pathway solutions for factories and processing plants.

02

Commercial Buildings

Safe, efficient and code-compliant solutions for commercial construction.

03

Infrastructure Projects

Durable products built to perform in
demanding infrastructure environments.

Electrical Metallic Tubing

Electrical Metallic Tubing Velkor manufactures Electrical Metallic Tubing (EMT) for commercial, industrial, and residential electrical installations. Every conduit is produced from premium low-carbon steel, delivering smooth bending performance, dimensional consistency, and dependable installation efficiency. Whether you need a cost-effective standard solution or maximum corrosion protection for demanding environments, Velkor offers the right zinc coating option for your project.

EMT Connector – Set Screw Type – Zinc Die Cast

EMT Connector – Set Screw Type – Zinc Die Cast Velkor set-screw EMT connectors are die-cast from virgin zinc alloy rather than lower-grade recycled material. Maintaining a controlled alloy composition helps reduce brittleness and the risk of cracking, giving the fitting greater toughness during installation, handling and transport.

EMT Coupling – Set Screw Type – Zinc Die Cast

EMT Coupling – Set Screw Type – Zinc Die Cast Velkor zinc die-cast set-screw EMT couplings join two lengths of EMT in a straight run. Each conduit end is secured independently by its own set screw, while the one-piece zinc alloy body supports consistent dimensions and straightforward installation.

EMT Connector – Compression Type – Zinc Die Cast

EMT Connector – Compression Type – Zinc Die Cast This zinc die-cast compression connector terminates EMT conduit at an electrical box, cabinet, or enclosure. Its compression nut applies circumferential clamping around the conduit for controlled alignment, while the one-piece zinc alloy body offers dimensional consistency and a clean installation profile.

EMT Coupling – Compression Type – Zinc Die Cast

EMT Coupling – Compression Type – Zinc Die Cast Velkor zinc die-cast compression EMT couplings join two lengths of EMT using independently tightened compression nuts. The compression mechanism grips around each conduit end to support alignment without exposed set screws, while the zinc die-cast body provides a clean, compact profile.

EMT Connector – Set Screw Type – Steel

EMT Connector – Set Screw Type – Steel Designed to connect EMT conduit securely to electrical boxes and enclosures through knockout openings. Manufactured from durable steel with a zinc-plated finish for corrosion protection. The set-screw design allows quick installation and provides a secure connection in dry locations.

View all EMT Conduit System

Grounding Insulated Bushing – Zinc Die Cast

Grounding Insulated Bushing – Zinc Die Cast Velkor Grounding Insulated Bushing – Zinc Die Cast combines an insulated conductor entry with a grounding lug at a threaded conduit end.

Insulated Rigid Conduit Bushing – Zinc Die Cast

Insulated Rigid Conduit Bushing – Zinc Die Cast Velkor Insulated Rigid Conduit Bushing – Zinc Die Cast adds an insulated entry surface at a threaded conduit end.

Rigid Conduit Bushing – Zinc Die Cast

Rigid Conduit Bushing – Zinc Die Cast Velkor Rigid Conduit Bushing – Zinc Die Cast provides a smooth conductor entry at a threaded conduit end.

Rigid Threaded Locknut – Zinc Die Cast

Rigid Threaded Locknut – Zinc Die Cast Velkor Rigid Threaded Locknut – Zinc Die Cast secures a threaded conduit or fitting at a box or enclosure entry.

Rigid Service Entrance Cap – Threaded – Aluminum

Rigid Service Entrance Cap – Threaded – Aluminum Velkor Rigid Service Entrance Cap – Threaded – Aluminum forms a weatherhead at a threaded IMC or RMC service-entrance riser.

Intermediate Metal Conduit

Intermediate Metal Conduit Velkor Intermediate Metal Conduit (IMC) provides greater wall strength and mechanical protection than EMT while remaining lighter than conventional rigid metal conduit. Three product configurations allow buyers to select the appropriate wall thickness, zinc coating and standard compliance for their market, project and budget.

View all IMC/RMC Conduit System

Non-Metallic Liquid-Tight 90° Connector – PVC

Non-Metallic Liquid-Tight 90° Connector – PVC Velkor Non-Metallic Liquid-Tight 90° Connector – PVC connects non-metallic liquid-tight flexible conduit to an enclosure at a 90-degree angle.

Non-Metallic Liquid-Tight Straight Connector – PVC

Non-Metallic Liquid-Tight Straight Connector – PVC Velkor Non-Metallic Liquid-Tight Straight Connector – PVC connects non-metallic liquid-tight flexible conduit to an enclosure in a straight approach.

Flex-to-Rigid Connectors – Zinc Die Cast

Flex-to-Rigid Connectors – Zinc Die Cast Velkor zinc die-cast flex-to-rigid connectors join flexible and rigid conduit, with three-screw hexagon and one-screw quincunx versions.

Non-Metallic Liquid-Tight Flexible Conduit

Non-Metallic Liquid-Tight Flexible Conduit Velkor non-metallic flexible conduit provides a flexible raceway for equipment and enclosure connections.

Three-Piece Flexible Conduit Connector – Zinc Die Cast

Three-Piece Flexible Conduit Connector – Zinc Die Cast Velkor Three-Piece Flexible Conduit Connectors provide a zinc die-cast enclosure connection in metric sizes from 16 to 63 mm.

FMC Screw-In Connector – Zinc Die Cast

FMC Screw-In Connector – Zinc Die Cast Velkor FMC Screw-In Connector – Zinc Die Cast terminates flexible metal conduit at an enclosure using a screw-in connection.

View all Flexible Conduit System

RIGID Threaded Conduit Bodies

RIGID Threaded Conduit Bodies Velkor RIGID threaded conduit bodies provide accessible direction changes and pull points in threaded rigid conduit runs. Available in C, LB, LL, LR, and T configurations, each body is supplied with a cover and gasket.

EMT Set-Screw Conduit Bodies

EMT Set-Screw Conduit Bodies Velkor EMT set-screw conduit bodies provide accessible direction changes and pull points in electrical metallic tubing runs. Available in C, LB, LL, LR, and T configurations, each body is supplied with a cover and gasket.

Single-Gang Weatherproof Boxes

Single-Gang Weatherproof Boxes Velkor single-gang weatherproof boxes provide cast aluminum wiring space for surface-mounted devices and conduit terminations. Hole-pattern variants are organized by opening arrangement, including side-opening models identified by an X suffix.

Double Gang Weatherproof Boxes

Double Gang Weatherproof Boxes Velkor double gang weatherproof boxes provide cast aluminum wiring space for multi-device surface installations and conduit entry arrangements. The grouped catalog structure separates standard and side-opening hole patterns, with X suffixes reserved for side-opening models.

Triple-Gang Weatherproof Boxes

Triple-Gang Weatherproof Boxes Velkor Triple-Gang Weatherproof Boxes provide three device positions in a 2-inch-deep aluminum body.

4-Inch Round Weatherproof Boxes

4-Inch Round Weatherproof Boxes Velkor 4-Inch Round Weatherproof Boxes provide a round wiring enclosure with four side entries and one bottom entry.

View all Electrical Boxes & Conduit Bodies

41 × 41 mm Strut Channel – Plain and Slotted

41 × 41 mm Strut Channel – Plain and Slotted Velkor 41 × 41 mm strut channel is available in plain and slotted 3-meter configurations. A standard 2.5 mm thickness supports general framing and support-system selection, while alternative thicknesses and four finish codes are available for project-specific ordering.

41 × 21 mm Strut Channel – Plain and Slotted

41 × 21 mm Strut Channel – Plain and Slotted Velkor 41 × 21 mm strut channel is available in plain and slotted 3-meter configurations. The lower-profile section uses a standard 2.5 mm thickness, while other thicknesses and four finish options are available for project-specific ordering.

Strut Clamps

Strut Clamps Velkor strut clamps cover catalog series VK2101–VK2110 and trade sizes from 1/2 in through 4 in. The range is organized under the Strut Channel System; model-to-size mapping and product-specific construction details require confirmation before publication or ordering.

View all Strut Channel System

Metric EMT Steel Conduit – Unthreaded

Metric EMT Steel Conduit – Unthreaded Velkor Metric EMT Steel Conduit is an unthreaded metallic raceway for routing and protecting electrical conductors. Six metric sizes are supplied in 3 m lengths, with confirmed outside-diameter limits, wall thickness, piece weight and bundle quantity shown for each catalog number.

Metric RMC Steel Conduit – Hot-Dip Galvanized

Metric RMC Steel Conduit – Hot-Dip Galvanized Velkor Metric RMC Steel Conduit is a heavier-wall metallic raceway with threaded ends for compatible rigid-conduit connections. The supplied table covers 20–110 mm sizes in 3 m lengths and records diameter limits, wall thickness, piece weight and package quantity for each model.

Metric EMT Connector – Set-Screw Type – Zinc

Metric EMT Connector – Set-Screw Type – Zinc Velkor Zinc Set-Screw EMT Connectors terminate unthreaded metric conduit at junction boxes, cabinets and panels. The conduit-side screw secures the tube, while the threaded enclosure end forms the box entry. Sizes run from 16 to 110 mm. Complies with IEC 61386-1 and IEC 61386-21.

Metric EMT Coupling – Set-Screw Type – Zinc

Metric EMT Coupling – Set-Screw Type – Zinc Velkor Zinc Set-Screw EMT Couplings join two matching conduit lengths in a straight run. Separate screws secure the tube ends, providing accessible fastening points on both sides of the joint. The range covers 16–110 mm metric EMT. Complies with IEC 61386-1 and IEC 61386-21.

Metric EMT Connector – Autofijación Type – Steel

Metric EMT Connector – Autofijación Type – Steel Velkor Autofijación Steel EMT Connectors provide the transition from matching metric conduit to a box or cabinet. Five sizes cover 20, 25, 32, 40 and 50 mm conduit for installations specifying the Autofijación fitting format. Complies with IEC 61386-1 and IEC 61386-21.

Metric EMT Coupling – Autofijación Type – Steel

Metric EMT Coupling – Autofijación Type – Steel Velkor Autofijación Steel EMT Couplings connect two matching conduit lengths in a straight route. The series covers 20–50 mm metric EMT and is intended for layouts specifying Autofijación fittings. Complies with IEC 61386-1 and IEC 61386-21.

View all IEC 61386 Conduit System

BM Series Modular Switches & Sockets

BM Series Modular Switches & Sockets BM Series is a modular range of wall switches, power socket outlets, USB and communication outlets, combination units, and interchangeable cover plates. Buyers can select the required electrical function and coordinate the installation with a cataloged plate color or decorative finish.

BM Wall Switches

BM Wall Switches BM wall switches offer one, two or three rocker controls in a matching rectangular faceplate. White, silver, champagne and wood-effect versions are shown for the switch range.

BM Decorative Faceplates

BM Decorative Faceplates BM decorative faceplates are offered with different opening layouts and a broad finish selection. BM21, BM22, BM23 and BM24 have white and ivory entries, while BM23 adds colored, matte, shiny and wood-effect finishes.

BM Mounting Frames and Accessories

BM Mounting Frames and Accessories The catalogue lists BM00, BM01, BM05 and BM06 mounting bases alongside the BM faceplate range. It also includes the M00 frame, MA22 and MC22 companion plates, and BMWP01 hinged cover accessory.

BM Assemblies Without Faceplates

BM Assemblies Without Faceplates These BM units combine the selected function with a mounting frame while leaving the decorative faceplate separate. The range includes bell controls, one to three rocker layouts, sockets, USB/socket combinations and communication connections.

MC Ivory Switches and Sockets

MC Ivory Switches and Sockets The MC ivory collection uses a square faceplate with rounded outer corners. Bell controls, rocker switches, power sockets, USB combinations and communication outlets share this ivory frame style.

View all Switches & Sockets