IMC/RMC Conduit System
-
Grounding Insulated Bushing – Zinc Die CastVelkor Grounding Insulated Bushing – Zinc Die Cast combines an insulated conductor entry with a grounding lug at a threaded conduit end.INSULATED ENTRY WITH A DEDICATED BONDING POINT This version combines two features at the end of an IMC or RMC run: an insulated conductor-entry surface and a grounding lug. A plain metal bushing provides the entry surface without insulation, while an insulated bushing without a lug does not provide this dedicated bonding-conductor connection point. The […]
VIEWINQUIRY -
Insulated Rigid Conduit Bushing – Zinc Die CastVelkor Insulated Rigid Conduit Bushing – Zinc Die Cast adds an insulated entry surface at a threaded conduit end.AN INSULATED SURFACE AT THE CONDUCTOR ENTRY Compared with a plain metal bushing, this version adds an insulating surface where conductors pass the threaded conduit end. It is an entry-protection component for the RMC or IMC system, while the grounding insulated version adds a separate lug for a bonding-conductor connection. Select the lug-equipped version when […]
VIEWINQUIRY -
Rigid Conduit Bushing – Zinc Die CastVelkor Rigid Conduit Bushing – Zinc Die Cast provides a smooth conductor entry at a threaded conduit end.A SMOOTH ENTRY AT THE CONDUIT END This plain zinc die-cast bushing provides a smooth conductor-entry surface at the threaded end of RMC or IMC. An insulated bushing adds an insulating surface at that entry; a grounding insulated bushing adds a lug for the specified bonding conductor. Choose among these versions by the required entry […]
VIEWINQUIRY -
Rigid Threaded Locknut – Zinc Die CastVelkor Rigid Threaded Locknut – Zinc Die Cast secures a threaded conduit or fitting at a box or enclosure entry.SECURE THE THREADED ENCLOSURE CONNECTION The locknut is the retaining component of a threaded conduit or fitting entry. Its ring threads into position at the enclosure wall. At the enclosure end of an IMC or RMC run, a locknut retains the threaded entry in position. A threaded coupling does a different job by joining two […]
VIEWINQUIRY -
Rigid Service Entrance Cap – Threaded – AluminumVelkor Rigid Service Entrance Cap – Threaded – Aluminum forms a weatherhead at a threaded IMC or RMC service-entrance riser.A WEATHERHEAD FOR A THREADED SERVICE RISER The service entrance cap terminates a threaded conduit riser where service conductors enter the raceway. Select it for the riser connection rather than a clamp-on EMT cap; the connection types serve different conduit arrangements. Threaded riser connection attaches to the selected IMC or RMC trade size. Aluminum body […]
VIEWINQUIRY -
Intermediate Metal ConduitVelkor Intermediate Metal Conduit (IMC) provides greater wall strength and mechanical protection than EMT while remaining lighter than conventional rigid metal conduit. Three product configurations allow buyers to select the appropriate wall thickness, zinc coating and standard compliance for their market, project and budget.THREE IMC OPTIONS. ONE CLEAR CHOICE FOR EVERY MARKET. Not every market requires the same conduit construction. Velkor therefore offers Intermediate Metal Conduit in three configurations, allowing customers to balance wall thickness, zinc protection, product length and standard requirements without paying for specifications their market does not need. The M Series provides a practical 3-metre […]
VIEWINQUIRY -
Rigid Metal Conduit – Hot-Dip Galvanized SteelVelkor Rigid Metal Conduit is a heavy-wall steel raceway for installations that require greater mechanical protection than lighter metallic conduit systems. Each cataloged 3050 mm length is threaded for use with a rigid conduit coupling and supplied-end protection should be confirmed with the order specification.
HEAVY-WALL PROTECTION FOR DEMANDING RACEWAYS RMC is the heavy-wall choice within Velkor’s North American metallic conduit range. Compared with EMT and IMC, its larger cataloged wall thickness and threaded connection system make it the deliberate selection where physical protection and a robust raceway are more important than minimizing conduit weight. The selection decision is not […]
VIEWINQUIRY -
RIGID 90 Degree Radius Elbow – Galvanized SteelVelkor RIGID 90 degree radius elbows redirect threaded RIGID or IMC conduit runs through a right-angle bend. The galvanized steel body provides a formed metal pathway for changing direction within the threaded raceway system.TURN THE RUN. KEEP THE ROUTE CONTINUOUS. A threaded conduit layout does not always continue in a straight line. This 90 degree radius elbow provides a formed change in direction between RIGID or IMC raceway sections without introducing a separate box at the bend. Its galvanized steel construction matches projects that specify a metal elbow […]
VIEWINQUIRY -
RIGID 90 Degree Radius Elbow – Galvanized SteelVelkor RIGID 90 degree radius elbows redirect threaded RIGID or IMC conduit runs through a right-angle bend. The galvanized steel body provides a formed metal pathway for changing direction within the threaded raceway system.
TURN THE RUN. KEEP THE ROUTE CONTINUOUS. A threaded conduit layout does not always continue in a straight line. This 90 degree radius elbow provides a formed change in direction between RIGID or IMC raceway sections without introducing a separate box at the bend. Its galvanized steel construction matches projects that specify a metal elbow […]
VIEWINQUIRY
LOAD MORE PRODUCTS
